Volume 7 Issue 4 - November 2016

  • 1. Material removal rate during chromium abrasives mixed edm of en19 steel

    Authors : Jaisukhpal Singh, Harvinder Lal, Paramjit Singh

    Pages : 385-390

    DOI : http://dx.doi.org/10.21172/1.74.053

    Keywords : EN19, EDM, material removal rate

    Abstract :

    EN19 steel is an valuable material for mechanical applications in industrial use. This steel have good properties to use in industrial applications. In this study, chromium (Cr) abrasives mixed kerosene fluid is used to drill blind holes in EN19 steel work piece. Factors like concentration of chromium abrasives in kerosene oil (Ca), copper tool electrode polarity (Ep), discharge current (Id), pulse on time (Ton), pulse off time (Toff), and discharge voltage (Vd) are varied as per L18 orthogonal array of Taguchi method to measure the material removal rate (MRR) of the EN19 steel. Appropriate addition of abrasives in kerosene oil is found to be fruitful for improvement in MRR of EN19 steel.

    Citing this Journal Article :

    Jaisukhpal Singh, Harvinder Lal, Paramjit Singh, "Material removal rate during chromium abrasives mixed edm of en19 steel", https://www.ijltet.org/journal_details.php?id=909&j_id=3549, Volume 7 Issue 4 - November 2016, 385-390, #ijltetorg