Volume 7 Issue 1 - May 2016

  • 1. Parametric optimization of silicate bonded co2 mould made of reclaimed sand for maximizing compression strength

    Authors : Venkata Ramana Maringanti

    Pages : 78-83

    DOI : http://dx.doi.org/10.21172/1.71.010

    Keywords : Keywords – optimization, compression strength, orthogonal array

    Abstract :

    Abstract- : Present work concentrates on optimization of process parameters of silicate bonded CO2 mould made of reclaimed sand .Four process parameters i.e. percentage of sodium silicate, quantity of CO2 gas, mixing time and coal dust addition are considered at two levels. Taguchi’s L8 orthogonal array is made use of .It is observed that all the considered factors are significant and obtained optimum confirmed through experimental validation.

    Citing this Journal Article :

    Venkata Ramana Maringanti, "Parametric optimization of silicate bonded co2 mould made of reclaimed sand for maximizing compression strength", https://www.ijltet.org/journal_details.php?id=901&j_id=3026, Volume 7 Issue 1 - May 2016, 78-83, #ijltetorg