Volume 7 Issue 1 - May 2016

  • 1. Effect of cutting speed in turning process using finite element modeling

    Authors : Sivarama Krishnaiah

    Pages : 32-36

    DOI : http://dx.doi.org/10.21172/1.71.003

    Keywords : ALE,FEM, crater wear, cutting speed, feed.

    Abstract :

    In this research work present a Finite element modelling as 3D effects to machining of cutting speed in tuning process. The Inconel 600 wokpiece and tungsten carbide tool material selected. In this machining processes, the cutting speeds were selected some parameters, depth of cut, feed were selected as constant. In Abaqus software was used for simulated the turning processes. In this work effects on the temperature, cutting forces, stresses of cutting speed, feed, depth of cut. Result, the temperature on the cutting tool increases with increasing cutting speed. Variations in shear stress occurring on the rake face of the tool.

    Citing this Journal Article :

    Sivarama Krishnaiah, "Effect of cutting speed in turning process using finite element modeling", https://www.ijltet.org/journal_details.php?id=901&j_id=3019, Volume 7 Issue 1 - May 2016, 32-36, #ijltetorg